Deutsch English EspaƱol Italiano

Vaulted Ball Mount for XPert Pole with Extended Top Insert

Vaulted Ball Mount for XPert Pole with Extended Top Insert
Zoom image

from 175,95 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 1 Week

Product no.: VBM-XPert
Vaulted Ball Mount for XPert Pole with Extended Top Insert
Colour: 
Diameter: 
This variation is out of stock for this product. You can preorder it here.

The vaulted ball mount enables you to install the XPert spinning pole under a ceiling or beam that is not parallel to the floor.

Unlike the older Vaulted Mount it can be tilted in any direction, not only along the hinge reducing the risk of screwing it in the wrong way. It enables you to install the pole permanently and increases the safety when you install the spinning pole higher than 3.3m.

The ball mount needs to be drilled and screwed into the ceiling or a beam. Since we don't know the material of your ceiling, we cannot include the right kind of screws. The vaulted ball mount replaces the ceiling dome of the XPert spinning pole. When you are using the ball mount, the pole can still be disassembled if needed only leaving the ball mount screwed to the beam or ceiling for future use.

IMPORTANT: The Inclined Ceiling Mount can only be used with the included Extended Top Insert. The extended top insert can not be used with the 125mm extension. If your height requires a 125mm extension, please contact us, because then you will need different length extensions.

Height of the vaulted ceiling mount with extended top insert: 10,5cm. This means an X-Pert Pole becomes 3cm higher through the use of the vaulted ceiling mount, or a Pro X-Pert becomes 5cm higher.

Part Height
Ceiling Dome X-Pert 8cm
Ceiling Dome Pro X-Pert 6cm
X-Pole XPert Home Mount & Insert2cm
X-Pert ball mount for parallel ceiling 8cm
X-Pert vaulted ball mount 10,5cm

Measurement: 4" x 7" = 10,16cm x 17,78cm = 101,6mm x 177,8mm

The adapter is included. The diameter of the pole must be specified.

If the ceiling is parallel to the ground, you may use the Standard Ball Mount for XPert Spinning Pole.

Image: Vaulted Ball Mount for XPert Spinning Pole and Adapter (Extended Top Insert)

Customer reviews:

Please log in to write a review
E-mail address:Password:

Customers who bought this product also bought the following products:

X-Pole Build-A-Pole Dual-Lined Custom-Build Poles

X-Pole Build-A-Pole Dual-Lined Custom-Build Poles

Customised XPole Build-A-Pole Dual-Lined Poles - ONLY UPON REQUEST BY EMAIL

X-POLE’s ‘Build-A-Pole’ customized dance pole is dual-lined, offering added strength and rigidity for heavy duty usage. The ‘dual-line’ technology ensures that the poles can endure a higher level of professional and commercial use. The Build-A-Poles have been installed at worldwide national and international pole dance competitions and is tried and tested by the most advanced Pole athletes.

Note: The Build-A-Pole dance pole must be attached to the ceiling with a block mount (vaulted block mount for vaulted ceilings / regular ball mount for horizontal ceilings). Therefore drilling is required.

from 459,90 EUR (19 % VAT incl. excl. Shipping costs)
Fixed Flange Plate for XPole Sport

Fixed Flange Plate for XPole Sport

The block mount is for permanent installation of the pole. It needs to be drilled and screwed into a stud or beam. The mount replaces the ceiling dome. The pole can be disassembled as needed. Only the mount remains permanently attached to the ceiling.

19,50 EUR (19 % VAT incl. excl. Shipping costs)
Pole Dancing Gloves - Mighty Grip - Non-tack

Pole Dancing Gloves - Mighty Grip - Non-tack

These gloves are specially developed for pole dancing and pole yoga. They are suitable for all levels from beginner to expert. The gloves are available in two versions: less adherent (non-tack) and stronger adhesion (tack). The less adherent (non-tack) gloves are designed for static (non-spinning) pole dance poles because they allow spinning around the pole more. The more adherent (tack) gloves can be used on spinning poles, because there they can improve the grip on the pole without interfering with the spinning.

18,20 EUR (19 % VAT incl. excl. Shipping costs)
Dry Hands - The Ultimate Grip Solution

Dry Hands - The Ultimate Grip Solution

Long-lasting non-greasy grip solution for enhanced performance while training on the pole and mastering those complex tricks. It feels natural, comfortable and leaves no annoying powdery residue on your skin nor your sports wear.

from 9,90 EUR (19 % VAT incl. excl. Shipping costs)
XPole Extensions

XPole Extensions

Easy to install extension for your dancing or fitness pole. Please check that diameter and colour match your x-pole.

 

from 29,95 EUR (19 % VAT incl. excl. Shipping costs)
X-Joint - Pole Connector for Extensions

X-Joint - Pole Connector for Extensions

X-Joints are patented connectors for connecting poles and extensions safely and easily. They are available is two different lengths and have to fit the diameter of the pole.

from 29,95 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Wednesday 10 July, 2013.

[<<First] | [<Back] | [Next>] | [last>>] | Product 8 of 26 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

e-mail address:
Password:
Forgot your password?

Item not available?

Get one(!) email when this item becomes available: Vaulted Ball Mount for XPert Pole with Extended Top Insert


Manufacturer information

X-Pole
X-Pole
More products

Parse Time: 0.132s