Cerchio aereo Firetoys (Aerial Hoop)

articolo n.: FHoop

189,00 EUR

incl. 19 % UST escl. Costi di spedizione

Tempi di spedizione: 3-4 Giorni

Colore:

nero
rosa shocking
bianco
nero
rosa shocking
bianco

Diametro:

850mm
900mm
950mm
1000mm
1050mm
850mm
900mm
950mm
1000mm
1050mm

Punti di attacco:

punto singolo
doppio punto
punto singolo
doppio punto

Ricevi una notifica quando la tua taglia torna disponibile email

I cerchi aerei, conosciuti anche come anelli aerei, Aerial Hoop o Lyras, sono i classici oggetti di scena per gli spettacoli circensi. I cerchi Firetoys vengono prodotti nelle officine del Regno Unito seguendo standard rigorosi. Sono realizzati in acciaio di alta qualità e completati con una finitura opaca, nera o bianca. Disponibili in varie dimensioni sono pensati sia per tutti quelli che vogliono avvicinarsi a questa fantastica disciplina, sia per chi ha già un livello intermedio.

I cerchi con un unico punto di sospensione sono generalmente i più acquistati, data la loro ampia versatilità. Tuttavia, tendono sempre a ruotare leggermente e se non vuoi che questo accada, ti consigliamo di valutare l'acquisto di un cerchio a punto doppio di sospensione.

Per l'installazione del cerchio aereo hai bisogno anche dei moschettoni adatti per fissarlo alla cinghia (oppure ad un cavo appeso o una fune di cotone rinforzata con cavi).

Dimensioni: Se sei indeciso sulla dimensione, un metodo comune per decidere il diametro più adatto è quello di sedersi sulla sedia e, prestando attenzione di mantenere la schiena dritta, prendere la misura dal sedile della sedia, fino a sopra la testa, ed infine aggiungere 10 cm. Ad esempio: se dalla sedia, alla sommità della testa misuri 80 cm, probabilmente avrai bisogno di un cerchio da 90 cm di diametro.

** Tutte le dimensioni si riferiscono al diametro ESTERNO. Il diametro interno è 5 cm inferiore rispetto a quello esterno.

Peso per dimensione (diametro esterno)

75cm : 3.79kg
80cm : 4.0kg
85cm : 4.1kg
90cm : 4.2kg
95cm : 4.9kg
100cm : 5.0kg
105cm : 5.2kg

Certificato di conformità

Paese di produzione Regno Unito
Diametro del tubo 25,4 millimetri
Colore Nero / Bianco
Limite di carico al lavoro 180kg (396 lbs)

 

 

How Firetoys Hoops are built

Weatherproof powder-coating

Powder-coating is a super high durability process that protects your hoop. A hoop that hasn’t been powder-coated or protected may eventually rust, even if it has been taped. Moisture will work its way through the tape during use and storage, and rust underneath the tape, so you might not even notice until you retape it. The powder-coating can be retaped indefinitely and will always keep your hoops protected from moisture.

TIG welding for higher quality

We use a high quality TIG (tungsten inert gas) welder that can achieve very high penetration welds very neatly and results in stronger, cleaner welds than the cheaper MIG (metal inert gas) machines can. MIG has telltale splashes of metal that have to be aggressively ground back to remove, meaning a lot of the material you’re welding gets taken back off again afterwards. With our processes, all it takes is a little bit of neatening.

Enclosed steel hanging points

For the 1- and 2-point hoops, the welds are applied to a single continuous piece of steel that wraps around the bar, giving an extra thickness to the attachment point, and allowing more material for the weld to penetrate

Firetoys Point Welding

bad point welding

Aerial Hoop Safety and Peace of Mind

All Firetoys aerial hoops are shipped with a thick foam tubing, like a pool noodle, wrapped around the hoop like a protective hug. This protects the hoop in transit and can be used to protect your hoop when it is not rigged. Shipping is usually very reliable but in the unlikely event you encounter any problem our customer service team is here to help you. We take responsibility for your hoop until you receive it, and fully support you after sale with anything you might need.

All of Firetoys aerial hoops are built according to high industry safety standards and regularly tested to destruction. Each type of hoop has a Working Load Limit (WLL) based on its materials and construction. This WLL is calculated on a 5:1 safety ratio for the steel of the hoops and the tabs.

For example, the 2-point hoops were recently tested to a breaking strain of 4290kg of downward force, applying this 5:1 ratio gives us a result of 772kg, which is way beyond the conformity WLL we have set of 300kg. We set a conformity to account for slight differences in the materials used, as all manufactured goods have a set variance. This allows for fluctuation without affecting the high working loads we work towards, and makes sure we're able to provide consistent documentation across our range of hoops.

Each aerial equipment made by Firetoys is allocated a serial number. With this, we can find out the day the product was made, whether it's for insurance reasons, inspection logs, or just to throw it a birthday party.

With a Firetoys Aerial Hoop, you’re buying much more than safety and security in the air, you’re buying peace of mind and customer care for years to come.

5 di 5 Stelle!5 di 5 Stelle!5 di 5 Stelle!5 di 5 Stelle!5 di 5 Stelle!

15/05/21

efficace

Cosa ne pensi?

Devi autenticarti per poter scrivere una recensione





Hai dimenticato la Password?|Nuovo cliente?
Parse Time: 0.061s