Cerchio a zero punti (Aerial Hoop)

articolo n.: OHoop

185,00 EUR

incl. 19 % UST escl. Costi di spedizione

Tempi di spedizione: 3-4 Giorni

Colore:

nero
rosa shocking
bianco
nero
rosa shocking
bianco

Diametro:

850mm
900mm
950mm
1000mm
1050mm
850mm
900mm
950mm
1000mm
1050mm

Ricevi una notifica quando la tua taglia torna disponibile email

I cerchi aerei, conosciuti anche come anelli aerei, Aerial Hoop o Lyras, sono i classici oggetti di scena per gli spettacoli circensi. Questo Aerial Hoop a zero punti è realizzato in acciaio di alta qualità e completato con una finitura nera, opaca. Disponibile in varie dimensioni.

Questo cerchio aereo (Areal Hoop) non ha punti di attacco per la sua sospensione ed il vantaggio è anche estetico, in quanto ti ritrovi con un bel cerchio pulito, senza punte o sporgenze derivate dalle sospensioni.

Tutte le dimensioni si riferiscono al DIAMETRO ESTERNO.

Diametro del tubo 25.4mm

 

** Tutte le dimensioni si riferiscono al diametro ESTERNO. Il diametro interno è 5 cm inferiore rispetto a quello esterno.

** A causa della mancanza di punti di sostegno, il rivestimento extra-resistente non è applicato nei due punti in cui dev'essere appeso. Questi punti sono stati invece coperti con un adesivo permanente che non deve essere rimosso. Dunque, l'adesivo e i due punti non rivestiti, non sono segni di danneggiamento e non influenzano le prestazioni del cerchio.

 

Aerial Hoop Zero Point

How Firetoys Hoops are built

Weatherproof powder-coating

Powder-coating is a super high durability process that protects your hoop. A hoop that hasn’t been powder-coated or protected may eventually rust, even if it has been taped. Moisture will work its way through the tape during use and storage, and rust underneath the tape, so you might not even notice until you retape it. The powder-coating can be retaped indefinitely and will always keep your hoops protected from moisture.

TIG welding for higher quality

We use a high quality TIG (tungsten inert gas) welder that can achieve very high penetration welds very neatly and results in stronger, cleaner welds than the cheaper MIG (metal inert gas) machines can. MIG has telltale splashes of metal that have to be aggressively ground back to remove, meaning a lot of the material you’re welding gets taken back off again afterwards. With our processes, all it takes is a little bit of neatening.

 

Reinforced 0 point welds

For the 0 point hoops, we weld all the way round the tube into a reinforcing spigot inside the tubing, which allows each end of the rolled tube to join onto something other than each other increasing the strength of the weld hugely as you’re not relying on a single seam of weld to support your weight.

We choose not to grind these welds back as this makes the hoop much easier to inspect for any damage to the weld. If these critical welds are ground back and then taped over, it would be impossible to see damage to the hoop even during regular inspections.

Aerial Hoop Safety and Peace of Mind

All Firetoys aerial hoops are shipped with a thick foam tubing, like a pool noodle, wrapped around the hoop like a protective hug. This protects the hoop in transit and can be used to protect your hoop when it is not rigged. Shipping is usually very reliable but in the unlikely event you encounter any problem our customer service team is here to help you. We take responsibility for your hoop until you receive it, and fully support you after sale with anything you might need.

All of Firetoys aerial hoops are built according to high industry safety standards and regularly tested to destruction. Each type of hoop has a Working Load Limit (WLL) based on its materials and construction. This WLL is calculated on a 5:1 safety ratio for the steel of the hoops and the tabs.

For example, the 2-point hoops were recently tested to a breaking strain of 4290kg of downward force, applying this 5:1 ratio gives us a result of 772kg, which is way beyond the conformity WLL we have set of 300kg. We set a conformity to account for slight differences in the materials used, as all manufactured goods have a set variance. This allows for fluctuation without affecting the high working loads we work towards, and makes sure we're able to provide consistent documentation across our range of hoops.

Each aerial equipment made by Firetoys is allocated a serial number. With this, we can find out the day the product was made, whether it's for insurance reasons, inspection logs, or just to throw it a birthday party.

With a Firetoys Aerial Hoop, you’re buying much more than safety and security in the air, you’re buying peace of mind and customer care for years to come.

Non ci sono ancora recensioni.

Cosa ne pensi?

Devi autenticarti per poter scrivere una recensione





Hai dimenticato la Password?|Nuovo cliente?
Parse Time: 0.127s